Skip to main content
Condition Multiplier

Condition reads like
a pressure gauge.

Five hard-stop zones. One brass needle. The needle’s position is the multiplier — and the multiplier rewrites the component’s effective remaining life.

Default reading shown is “Fair” (1.00×) — the component lasts exactly its expected lifespan. Slide the rating one zone right and you gain 10% life. One zone left and you lose 25%.

Five zones. Five multipliers. Five playbooks.

Each zone changes how the verdict engine reads the component — and what it tells you to do next.

Grade
Poor
0.50×
Half its expected life left

Replace this cycle

Grade
Worn
0.75×
25% less life than expected

Lean toward replace

Grade
Fair
1.00×
Standard expected life

Run cost-per-year math

Grade
Good
1.10×
Slight life bonus — well kept

Repair when sensible

Grade
Excellent
1.30×
+30% life bonus — like new

Almost always repair

Same age. Wildly different lives.

The multiplier resolves a 20-year HVAC into anywhere from 26 to 10 years of effective life depending on its condition grade.

Expected lifespan Poor (0.50×) Worn (0.75×) Fair (1.00×) Good (1.10×) Excellent (1.30×)
10 yrs 5 7.5 10 11 13
15 yrs 7.5 11.25 15 16.5 19.5
20 yrs 10 15 20 22 26
25 yrs 12.5 18.75 25 27.5 32.5
30 yrs 15 22.5 30 33 39

Two real components, side by side.

Same multiplier table. Two very different verdicts.

HVAC Condenser
Maple Property
Expected lifespan20 yrs
Age12 yrs
Condition ratingFair (1.00×)
Effective lifespan20 yrs
8 years left — verdict: Monitor
Asphalt Roof
Oak Property
Expected lifespan25 yrs
Age14 yrs
Condition ratingWorn (0.75×)
Effective lifespan18.75 yrs
4.75 years left — verdict: Replace

Read Your Gauge

Every component gets a 5-grade reading and a multiplier — no more “it looks fine to me.”

Get Started