Skip to main content

70+ Pre-Built Repair Jobs. Ready in Seconds.

The Repair Cost Estimator™ Template Library contains over 70 common repair jobs across 14 trades — each with realistic labor rates and material costs. Select templates, assign them to rooms, and build a detailed estimate in under 60 seconds.

Browse the Template Library

Filter by trade to find jobs fast. Click any card to see the full labor and material breakdown.

Plumbing

Replace Water Heater

Plumber, 4 hrs @ $85/hr — $340
3 materials — $730
$1,070
Labor
Plumber 4 hrs × $85/hr = $340
Materials
50-gal gas water heater (each) 1 × $650 = $650
Flexible connectors (pair) 1 × $45 = $45
Vent pipe (linear ft) 5 × $7 = $35
Total $1,070
Flooring

Install LVP Flooring

Flooring Installer, 8 hrs @ $55/hr — $440
3 materials — $2,045
$2,485
Labor
Flooring Installer 8 hrs × $55/hr = $440
Materials
LVP planks (sq ft) 500 × $3.50 = $1,750
Underlayment (sq ft) 500 × $0.50 = $250
Transition strips 3 × $15 = $45
Total $2,485
Electrical

Replace Electrical Panel

Electrician, 6 hrs @ $95/hr — $570
3 materials — $805
$1,375
Labor
Electrician 6 hrs × $95/hr = $570
Materials
200A panel 1 × $480 = $480
Breakers 20 × $12 = $240
Wire (50 ft) 1 × $85 = $85
Total $1,375
Paint & Drywall

Interior Paint (Whole House)

Painter, 24 hrs @ $40/hr — $960
3 materials — $725
$1,685
Labor
Painter 24 hrs × $40/hr = $960
Materials
Paint (gallon) 12 × $45 = $540
Primer (gallon) 4 × $25 = $100
Supplies (rollers, tape, drop cloths) 1 × $85 = $85
Total $1,685
HVAC

Replace Furnace

HVAC Tech, 6 hrs @ $90/hr — $540
2 materials — $2,070
$2,610
Labor
HVAC Tech 6 hrs × $90/hr = $540
Materials
80K BTU furnace 1 × $1,850 = $1,850
Ductwork modifications 1 × $220 = $220
Total $2,610
Bathrooms

Full Bathroom Remodel

Plumber 8 hrs + Handyman 12 hrs — $1,220
4 materials — $1,530
$2,750
Labor
Plumber 8 hrs × $85/hr = $680
Handyman 12 hrs × $45/hr = $540
Materials
Vanity 1 × $450 = $450
Toilet 1 × $280 = $280
Tile (sq ft) 80 × $6 = $480
Fixtures (faucet, showerhead, etc.) 1 × $320 = $320
Total $2,750

Build a 7-job estimate from templates in under 60 seconds vs. 30+ minutes from scratch. Select templates, assign them to rooms, adjust rates for your market, and you have a detailed estimate with labor and materials before you leave the driveway.

Why Templates Beat Starting from Scratch

Every template is built with realistic labor rates and material costs. You customize — you don't guess.

70+ Jobs Across 14 Trades

Plumbing, Electrical, HVAC, Roofing, Flooring, Kitchen, Bathrooms, Paint & Drywall, Windows & Doors, Structural, Landscaping, Appliances, General, and Exterior — every trade you encounter on a residential rehab is covered with multiple job templates per category.

From Template to Custom Estimate in Seconds

Select a template, assign it to a room, and click Add. The estimator forks a copy with all labor entries and material lines pre-filled. Adjust the hourly rate for your market, update quantities for your property, and you have a detailed estimate line item without typing a single cost from memory.

Realistic Costs Based on National Averages

Every template starts with labor rates and material costs based on national residential averages. A plumber starts at $85/hr, an electrician at $95/hr, LVP at $3.50/sq ft. These aren't random guesses — they reflect what investors actually pay. Adjust up or down for your market once and save the changes.

TL;DR — Why the Template Library Matters

The biggest barrier to accurate repair estimates is blank-page paralysis. Investors either guess at costs or spend 30+ minutes researching each line item. The Template Library eliminates both problems: 70+ pre-built repair jobs with realistic labor rates and material costs, organized by trade, searchable by name, and ready to add to any estimate in seconds.

Templates fork on add — your customizations never change the original. Adjust rates for your market once, and every future estimate starts from your adjusted baseline instead of national defaults.

Build Estimates Faster with Templates

Browse 70+ pre-built repair jobs, select what you need, assign to rooms, and have a detailed estimate with labor and materials in under a minute.

Get Started
All Features